IPv4 cost per service: what a used address really costs
You pay for the whole subnet but sell only some of its addresses. Enter the price, subnet size, reservations and occupancy to see the real cost per address and per service, your margin and the minimum price.
Your numbers
This is an example: the starting numbers, including the address prices, are made up and do not describe any real host or market. Enter your own and the result updates straight away.
What you pay for the addresses
Changing this converts the amounts you entered, so the cost stays the same.
Net. It is multiplied by every address in the subnet, including those you cannot sell.
Resource fees, registry entries and anything else you pay beyond the address price.
Subnet
The number after the slash: 24 for a /24. From 8 to 32.
A /24 has 256 addresses.
Addresses you cannot sell
How many addresses drop out depends on how you route the network. The starting values describe a classic subnet with the gateway inside it. Change them to match yours.
The first address in the subnet. In a classic subnet it identifies the network itself and never reaches a customer.
The last address in the subnet. In a classic subnet it is used for broadcasts and never reaches a customer.
Router addresses in this subnet. With several routers enter them all, and if the gateway sits outside the subnet, enter 0.
Addresses you keep for yourself: DNS, the panel, monitoring and any spare ones you do not sell.
Routing addresses one by one, as /32s? Then the first and last addresses can go to customers too, and the gateway can sit outside the subnet. Enter 0 wherever a reservation does not apply to you.
That leaves 253 addresses to sell.
Sales
How much of the sellable address space is sold and in use.
For a shared address, enter a fraction: 0.25 means one address across four services.
Net, per address. If the address is included in a service, enter the part of its price you set aside for it.
The rate from your contract, taken from the customer price. Enter 0 if you do not want to count it.
How the cost per address changes with occupancy
You pay the same for the subnet at any occupancy, so the fewer addresses you use, the more each one costs.
| Occupancy | Addresses in use | Cost per address | Cost per service | Margin per address | Minimum price |
|---|---|---|---|---|---|
| 40% | Addresses in use101 | Cost per address$5.07 | Cost per service$5.07 | Margin per address-$1.19 | Minimum price$5.23 |
| 50% | Addresses in use126 | Cost per address$4.06 | Cost per service$4.06 | Margin per address-$0.18 | Minimum price$4.19 |
| 60% | Addresses in use151 | Cost per address$3.39 | Cost per service$3.39 | Margin per address$0.49 | Minimum price$3.50 |
| 70%Your occupancy | Addresses in use177 | Cost per address$2.89 | Cost per service$2.89 | Margin per address$0.99 | Minimum price$2.99 |
| 80% | Addresses in use202 | Cost per address$2.53 | Cost per service$2.53 | Margin per address$1.35 | Minimum price$2.62 |
| 90% | Addresses in use227 | Cost per address$2.26 | Cost per service$2.26 | Margin per address$1.62 | Minimum price$2.33 |
| 100% | Addresses in use253 | Cost per address$2.02 | Cost per service$2.02 | Margin per address$1.86 | Minimum price$2.09 |
At your price the addresses pay for themselves from 132 sold out of 253, which is 52.2% occupancy.
Where these numbers come from
The six formulas behind the calculator. Put them in a spreadsheet and you will get the same result.
- Subnet size
2 ^ (32 - prefix) - A /24 has 256 addresses, a /25 has 128, a /29 has 8 and a /32 has 1. The number you can sell is the size minus the addresses you marked as unavailable.
- Monthly cost of the addresses
lease, or (purchase price - residual value) / months - A per-address rate is multiplied by every address in the subnet, because you also pay for the ones you will not sell. Other costs of the subnet are added on top.
- Real cost of a used address
monthly cost / addresses in use - Addresses in use are the sellable addresses times occupancy, rounded down to a whole number, because you cannot sell part of an address.
- Cost per service
cost of a used address x addresses per service - With a shared address you multiply by a fraction, so the cost of one service drops.
- Margin per address
customer price x (1 - fee) - cost of a used address - A negative figure means you are paying to keep the addresses. Margin from the whole subnet is revenue minus the fee and the monthly cost.
- Minimum price
cost of a used address / (1 - fee) - The price at which margin is zero at that occupancy. We round it up to the next cent, so it really covers the cost.
What the calculator leaves out
- VAT and income tax
- Cost of capital and changes in address value: you enter the residual value yourself
- Work on the addresses, unless it is in other costs
- Revenue from the service itself, only from the addresses
- IPv6 addresses
Questions about IPv4 cost
What exactly is calculated and what happens to the data you enter.
Because you pay for the whole subnet, while only the addresses in use earn revenue. The cost of all the addresses is spread over the ones you sold, so at lower occupancy each one costs more.
That depends on how you route the network, which is why they are ordinary fields. In a classic subnet the first address identifies the network, the last is used for broadcasts and the gateway takes one. When you route single addresses as /32s, the first and last addresses can go to customers and the gateway can sit outside the subnet. Enter what applies to you.
Enter the purchase price, the amortization period and, if you plan to sell later, the residual value. The calculator spreads the difference evenly across the months. This is a sum for setting prices, not accounting: your accountant decides on amortization for tax.
The part of the service price you set aside for it. You can also enter 0, and the margin per address will show what each address costs you a month.
Enter a fraction in the addresses per service field. 0.25 means one address across four services, so the cost per service is four times lower than the cost of the address. The customer price is still given for the whole address.
Because you cannot sell part of an address. 70% of 253 addresses is 177.1, so we count 177. That is why the occupancy table shows whole numbers of addresses.
It changes the symbol next to the amounts and does not convert what you entered. The made-up example gets its own starting amounts. This page does not fetch any exchange rate.
No. Your browser does all the calculating. The numbers are stored in the page address after the # sign, and browsers do not send that part to the server, so it is not in our logs. Anyone who gets the link sees everything you entered.
Keep track of addresses in the panel where you sell them
In Flaem every address has a state: free in a pool, assigned to a service, assigned permanently to an account or leased out. 14-day trial with every feature.