Bandwidth calculator: TB, Mbit/s and the 95th percentile
Turn monthly transfer into an average speed and back, work out the 95th percentile from your own samples, how long sending data takes and how much transfer a link gives at the utilization you choose. We keep GB and GiB apart, because they are different units.
Monthly transfer and average speed
This is an example: every starting number on this page, including the traffic samples, is made up and describes no real link. Enter your own and the result updates straight away.
From 28 to 31. It changes every monthly result on this page.
Result
- Mbit/s
- 30.864
- Gbit/s
- 0.030864
- MB/s
- 3.858
- GB
- 10,000
- TB
- 10
- GiB
- 9,313.2
- TiB
- 9.095
- Seconds in the month
- 2,592,000
This is an average: traffic spread evenly over the month. The 95th percentile below tells you about the peaks.
How much transfer a link gives
For operators: link speed and utilization give transfer per month. The table runs the same sum at every level of utilization.
The share of the link traffic takes on average across the whole month.
Result
- Average speed
- 400 Mbit/s
- TiB
- 117.871
- Transfer per day
- 4.32 TB
- At 100% utilization
- 324 TB
| Utilization | Average speed | Transfer in TB | Transfer in TiB |
|---|---|---|---|
| 10% | Average speed100 Mbit/s | Transfer in TB32.4 | Transfer in TiB29.468 |
| 20% | Average speed200 Mbit/s | Transfer in TB64.8 | Transfer in TiB58.935 |
| 30% | Average speed300 Mbit/s | Transfer in TB97.2 | Transfer in TiB88.403 |
| 40%Your level | Average speed400 Mbit/s | Transfer in TB129.6 | Transfer in TiB117.871 |
| 50% | Average speed500 Mbit/s | Transfer in TB162 | Transfer in TiB147.338 |
| 60% | Average speed600 Mbit/s | Transfer in TB194.4 | Transfer in TiB176.806 |
| 70% | Average speed700 Mbit/s | Transfer in TB226.8 | Transfer in TiB206.273 |
| 80% | Average speed800 Mbit/s | Transfer in TB259.2 | Transfer in TiB235.741 |
| 90% | Average speed900 Mbit/s | Transfer in TB291.6 | Transfer in TiB265.209 |
| 100% | Average speed1 Gbit/s | Transfer in TB324 | Transfer in TiB294.676 |
The 95th percentile of your samples
Sort the samples, drop the top 5% and take the highest one left. A short peak then does not change the result, while steady high traffic does.
Separate them with a space, a new line or a semicolon. A comma inside a number is a decimal mark, and only separates values when nothing else does.
Result
- Samples
- 40
- Top samples dropped
- 2
- Highest sample
- 402 Mbit/s
- Mean of the samples
- 177.425 Mbit/s
Samples every 5 minutes in a 30-day month: 8,640. Of those, 432 drop out, or 36 h of traffic.
How long sending the data takes
Size and speed give the time with the link fully used. Handy for migrations, backups and restores.
Result
- Bits to send
- 4,000,000,000,000
Without protocol overhead and retransmissions, so in practice it takes longer.
The same amount at other speeds
- 100 Mbit/s
- 11 h 6 min 40 s
- 1 Gbit/s
- 1 h 6 min 40 s
- 2.5 Gbit/s
- 26 min 40 s
- 10 Gbit/s
- 6 min 40 s
- 25 Gbit/s
- 2 min 40 s
GB and GiB, bits and bytes
The same amount of data in every unit, so you do not confuse what a panel shows with what a contract says.
| Unit | This amount | One unit in bytes |
|---|---|---|
| B | This amount500,000,000,000 | One unit in bytes1 B |
| Mbit | This amount4,000,000 | One unit in bytes125,000 B |
| Gbit | This amount4,000 | One unit in bytes125,000,000 B |
| MB | This amount500,000 | One unit in bytes1,000,000 B |
| MiB | This amount476,837.2 | One unit in bytes1,048,576 B |
| GB | This amount500 | One unit in bytes1,000,000,000 B |
| GiB | This amount465.661 | One unit in bytes1,073,741,824 B |
| TB | This amount0.5 | One unit in bytes1,000,000,000,000 B |
| TiB | This amount0.454747 | One unit in bytes1,099,511,627,776 B |
GB and GiB
1 GB is 1,000,000,000 bytes, or 10^9. 1 GiB is 1,073,741,824 bytes, or 2^30. A GiB is 7.37% larger than a GB and a TiB is 9.95% larger than a TB, so 1 TB is 931.32 GiB.
Bits and bytes
1 byte is 8 bits. Links are quoted in bits per second and files in bytes, so 1 Gbit/s is at most 125 MB/s, or 119.21 MiB/s.
Where these numbers come from
The five formulas behind the calculator. Put them in a spreadsheet and you will get the same result.
- Transfer to speed
bytes x 8 / seconds in the month - 10 TB in a 30-day month is 10,000,000,000,000 x 8 / 2,592,000, or about 30.86 Mbit/s.
- Speed to transfer
bits per second x seconds in the month / 8 - 100 Mbit/s for 30 days is 100,000,000 x 2,592,000 / 8, or 32.4 TB.
- Link at a utilization
speed x utilization x seconds in the month / 8 - 1 Gbit/s at 40% for 30 days is 129.6 TB, and at 100% it is 324 TB.
- 95th percentile
sample number ceil(n x 0.95) after sorting - Out of 40 samples, sample 38 counts and the top 2 drop out. Out of 8,640 samples, 432 drop out. This is the nearest-rank method, with no interpolation between samples.
- Send time
bytes x 8 / bits per second - 500 GB at 1 Gbit/s is 4,000 seconds, or 1 h 6 min 40 s.
What the calculator leaves out
- Protocol overhead: TCP, IP and Ethernet headers take up the link too
- Traffic direction: enter samples from the direction your contract bills
- Prices and any minimum commitment in your contract
- Billing periods other than a month
Questions about the bandwidth calculator
Units, the percentile and what happens to the data you enter.
Links are quoted in bits and data in bytes, and a byte has 8 bits. 1 Gbit/s is at most 125 MB/s, and a little less once protocol overhead is taken off.
Your provider's contract or price list says which. Check it, because the difference grows with size: 7.37% for GiB and already 9.95% for TiB. The units section converts a value both ways.
The average spreads all traffic evenly over the month, while the 95th percentile looks at the level that 95% of samples stayed under. With uneven traffic the percentile is above the average, and short peaks do not raise it while they fit in the dropped 5%.
Below 20 samples nothing drops out, so the result is the highest sample. With samples every 5 minutes, a 30-day month gives 8,640 samples and drops 432, or 36 hours of traffic. Take the sampling interval and method from your contract, because the calculator does not know them.
The calculator takes one series of numbers. If your contract bills the higher of the two directions or their sum, prepare the samples the way the contract describes and paste the finished series.
That is the starting value, and you can change it in the form to anything from 28 to 31. In a 31-day month the same 1 TB gives a lower average speed than in a 28-day month, because the same data spreads over more seconds.
The result assumes the whole speed goes to data. In practice, protocol headers and retransmissions take a share, and the disk and the other end of the connection limit the speed too.
No. Your browser does all the calculating. The data is stored in the page address after the # sign, and browsers do not send that part to the server, so it is not in our logs. With thousands of samples the link gets very long, and anyone who gets it sees what you entered.
Sell transfer in plans and see p95 next to every service
In Flaem, a VPS plan includes transfer and the panel adds any overage at renewal. Every chart shows p50, p90, p95 and p99. 14-day trial with every feature.